The Ghost Immobiliser
Immobilisers are an effective tool to fight vehicle theft. They stop the vehicle from starting if it isn't equipped with an identification card. They also help to stop hotwiring and other traditional methods of vehicle theft. Modern methods such as key cloning and relay theft are becoming more common.
The Ghost Immobiliser was designed to fight these trends and make your car inaccessible. It is silent and stealthy and does not rely on radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects to the CAN data network of your vehicle in order to prevent key cloning or theft. It is an TASSA approved product and has been endorsed by insurance companies. It is almost undetectable by thieves and operates quietly. It uses buttons on your steering wheel, centre console and door panels to create an individual pin code sequence that has to be entered before you are able to start your vehicle. You can create up to 20 different sequences for increased security. It's easy to install and doesn't require any additional hardware.
It is recommended to choose an accredited CAN immobiliser installer that specialises in your specific vehicle type to ensure the most effective results. It is ideal if they have a workshop located in your area that allows you to visit and have the installation completed. There is also an array of tools and materials that will aid you in the installation. They will come with basic hand tools, multimeters insulation tape, and heat shrink tubing for protecting the connections. A user's manual will give you the necessary instructions for your vehicle's wiring.
Before starting the installation, disconnect the battery to prevent short circuits and airbag deployment. Double-checking the CAN L and CAN H wires is vital, as incorrect identification can cause a misalignment of the system. It is also a good idea to label or mark the wires. Additionally, you can make use of a multimeter to confirm that the power source you have identified provides a consistent 12V supply.
Advanced thieves can employ a variety of tactics to evade the Ghost Immobiliser, which includes jamming and using spoofing signals. These techniques involve amplifying signals from the key fob to the electronic controller unit. With advanced anti-jamming technologies and constant monitoring, your vehicle can be protected from these sophisticated attacks.
Security enhancing
A ghost immobiliser offers an extra layer of security to guard your car from theft. It is an PIN code security system that can be activated by pressing buttons on your steering wheel or dashboard making it difficult for thieves to gain access to the device and take your vehicle. The device is designed to be hidden inside your vehicle. It has no lights or other indicators to alert a potential burglar to its presence. It communicates with your vehicle's ECU via the data bus, meaning it isn't susceptible to the same hacking or relay attacks that can disable conventional security systems.
This system is a great investment for those who own high-end vehicles, as they are at greater risk of being stolen because of their value and popularity. Its enhanced security features guard against key cloning, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers may be connected to an app, so that you can easily arm and dearm them. They may include a service/valet setting that allows you to temporarily deactivate the immobiliser during repairs or service.
A ghost immobiliser has another wonderful benefit that it doesn't require any wire cutting. This is a nice feature, especially if you have a newer car that doesn't have immobiliser built-in technology. Some systems may also be capable of integrating with a GPS tracking device, which can provide an additional layer of security to your vehicle. A GPS tracker can also help you reduce the cost of insurance. If you opt to buy ghost immobilisers be sure it is TASSA certified and a professional installer installs it for you.
Compatibility with all major brands and models
The Ghost Immobiliser has been designed to work with all major brands and models of vehicle that will protect your pride and joy against theft. It generates a unique pin code by pressing buttons on your steering wheel, console or door panels. You must enter the code before you can drive. The system is tamper proof and undetectable, and is backed by three-year guarantee. It is also fully endorsed by insurance companies. This means that you will be able to lower your premiums.
In contrast to standard immobilisers that utilize the key fob of your car to control the car's ignition however, the Ghost system is connected directly to the engine controller unit via the CAN data bus. It is nearly impossible to remove, disable or hack. Additionally to this, the Ghost system can be linked with a secure iPhone app that allows for remote monitoring and management.
You can create an PIN code that is easy to remember, yet mathematically, it is impossible for thieves to figure out. The PIN can be personalized and modified at any time, so you can keep your vehicle secure even if it's parked on the street or in a parking lot. You can also select valet or service mode if someone else needs to drive your vehicle temporarily, such as when it is in the garage. This is a great way to prevent your vehicle from being stolen by an unscrupulous mechanic. To give you more security you can choose a Ghost call alert to inform you when your car is moving or if it has been moved.
Convenience
The ghost immobiliser is a highly efficient security device, protecting your vehicle against common methods of theft such as key cloning and relay attacks. It connects to the vehicle's CAN data network and blocking communication with the engine ECU. This makes it impossible for thieves to copy or hack your vehicle, which makes the installation of this system a great idea for all drivers.
Once installed, car ghost immobiliser will need to enter a PIN code that is up to 20 digits using the buttons on your dashboard or steering wheel in order to start the engine. The system is completely concealed and inaccessible to thieves because it does not emit any radio frequency signals. It is also able to be set to change the PIN of the user, which adds security. The system is also designed to stop cutting of circuits, making it virtually impossible to hack into.
Certain systems let you connect directly to the immobiliser using an app on your phone to disarm it immediately if you forget your PIN. Some systems also have a service/valet setting that allows you to temporarily to start your car for example when you drop it off at valet or garage.
The Ghost Immobiliser is also undetectable by thieves, as it does not transmit radio signals. This is a significant advantage compared to other aftermarket security systems. Additionally, it is simple to use and doesn't require any complex wiring. It can be used in combination with dash cams to provide added safety. Dash cams include the Thinkware F70, which features clear & sharp 1080p HD dashcam footage as well as Format Free Technology and parking mode. The system is able to be hardwired to ensure maximum performance and durability.
Installation
It's crucial to choose the best immobiliser ghost to safeguard your vehicle from thieves. This device can stop car thefts by blocking communication between key fobs and the engine controller unit. This device prevents thieves from stealing and cloning the signal to start your vehicle. It also can detect if it has been tampered and notify the owner of the vehicle.
The device is simple to install and integrates with the existing systems in your vehicle. It does not require any modifications to vehicle wiring and can be installed in a hidden location, like under the dashboard. To ensure that the device is correctly installed, follow the instructions in the user's manual. It is also crucial to test the system after installing it. This will ensure the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 immobiliser, and have it installed by a certified installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to remove the system or bypass it. Installation generally takes between 2 and 3 hours.
car ghost immobiliser is recommended that you consult the wiring diagram of your vehicle during the installation process. This will allow you to identify the CAN High and the CAN Low wires needed to connect your Ghost to the engine of your vehicle. It is also essential to verify the connections to ensure that they are safe and well-insulated.
After the installation is completed, you can start using the Ghost Immobiliser in a normal manner. It will disable the ignition of your vehicle if it is not started with the correct PIN, which you can create yourself. The immobiliser ghost can be set to Service/Valet Mode if you need your vehicle to be serviced or valet-parked.